Skip to main content

How to Know if a Cell Phone Battery is Dead

Cell phones use rechargeable lithium ion batteries. This type of battery can recharge 300 to 500 charge cycles to its full capacity before it will not charge fully. If your cell phone needs charging more often or the charge lasts for several hours less than when the battery was new, you may need a replacement battery. Testing the battery to obtain its capacity will tell you if a new battery is needed.


Instructions

  • 1
    Plug the cell phone into its charger and plug the other end in to an electrical outlet. Allow the battery charge to full capacity.
  • 2
    Press and hold the power button on the cell phone to turn it off. Let the phone power down and remove the back cover to access the battery.
  • 3
    Remove the battery and observe the label for the voltage. Most cell phone batteries are 3.4 to 4.5 volts.
  • 4
    Turn on a multimeter. A multimeter tests current flow in voltage and amps and also resistance in a circuit. Place the black test probe on the negative battery contact and the red test probe on the positive battery contact. The contacts are on the edge or bottom of the battery and should be marked negative (-) and positive (+).
  • 5
    Place one test probe on the left terminal and one on the right, if the battery terminals are not marked. These are usually the correct terminals and the meter will show a positive reading. If the meter shows a negative reading, move the left or right probe to the middle terminal until one pair shows a positive reading.
  • 6
    Read the display on the multimeter. The voltage should be the same or a little higher than the battery label due to the fact that batteries hold an additional charge above the full charge mark when they have just been charged.

Comments

  1. This comment has been removed by the author.

    ReplyDelete
  2. Nice and very informative post..

    Thanks for sharing such a valuable information regarding moblie phone chargers!!

    buy mobile phone chargers

    ReplyDelete
  3. Nice information you got there. The change in current temperature is also responsible for battery degrading. Sometimes your phone cover can be a reason for overheating as some elements trap heat for more time than others. Such as plastic, and glass. I have been using a wooden phone case and it is something extraordinary looking and comfortable too.

    ReplyDelete

Post a Comment

Popular posts from this blog

How to Hard Reset NOKIA 1280 | Unlocking Codes NOKIA 1280

This post discuss about couple of methods that you can use to reset your Nokia 1280 phone’s security code. These methods include: key combination short code to reset code full reset through settings method full reset through unlocking code without sim Every Nokia phone comes with default code 12345. If you care about security of your phone or personal information like contacts, photos or anything important that you put on your handset, this code can be essential.So it’s important change default code & uses it for security. But lots of people tend to forget this code because they don’t use it so often. Below are some of the solutions for this problem.

How To Reset Forgotten Nokia Security Code

Every Nokia phone comes with default code 12345. If you care about security of your phone or personal information like contacts, photos or anything important that you put on your handset, this code can be essential. You can set your phone to lock on SIM card changes. You can also use this code on your key guard. However, some models may not support this feature. In that case you can use mobile anti-virus software to enable it. So it’s important change default code & uses it for security. But lots of people tend to forget this code because they don’t use it so often. And once forgotten Nokia won’t help you to recover it.

Post or Send Voice Messages and Audio Comments on Facebook

This chrome extension is developed for this purpose so that you can send your voice notes to your friends. Extension is called as Talk and Comment After you install this extension, you need to enable it by clicking the Allow button on top. This will enable the extension to use your Microphone whenever required, as it is required to record the voice.